Description
Shield 2Expedition-grade, freestanding, mountaineering tent
The Shield is a lightweight, four-season mountaineering tent with a single door and single-wall design meant to be taken to the highest elevations, withstand the strongest winds, and keep you warm in the coldest climates. This bomber tent is constructed with ultralight nylon, 3-layer waterproof, breathable fabric with a microporous membrane and tricot layer to enhance moisture management and provide protection from the elements. The Accessory Vestibule (sold separately) adds covered entry and exit, plus additional gear storage when you need a little more room to spread out undercover.
FeaturesDesignFour season design and materials create a shelter that is ready for any adventureConstructionDurable single-wall construction provides a simple-to-setup reliable shelter without adding weightMoisture ManagementEnhanced moisture management with specially developed ultralight three-layer fabric that is waterproof and breathableDoorSingle-door with storm flap features two windows- lower window for weather-viewing and upper window with two closure options: mesh only for ventilation or zip closed for maximum protectionVentsTwo supported roof vents with reach-through mesh design allows vent closure from tent interior. Zip closed nylon vent flaps for complete closurePole SleevesPole sleeves attach tent body to poles and reinforce structureStabilityTriangular stake-out flaps on exterior add extra guyout points for added stabilityReinforcementReinforced tent corners at webbing locationsReady to PitchReady to pitch with pre-cut reflective guylines and tensioners attached to flyInterior LoopsMultiple interior gear loopsVestibuleCovered entry and exit with room for additional gear storage using Accessory Vestibule, sold separatelyFootprintTo extend the life of your tent floor and enable fast fly compatibility, we recommend using a Big Agnes footprint – sold separatelySpecsTrail Weight3lb 14ozTotal Weight4lb 10ozPacked Size7″ x 17.5″Floor Area28ft²Head Height40″Footprint Weight7ozMaterialsBody/FlyPertex® Shield three-layer fabric: 1- tightly woven, DWR-treated nylon face fabric, 2- microporous membrane to enhance moisture management, 3- a tricot layer for comfort and durabilityFloorDurable 70D nylon with 10,000mm waterproof polyurethane coatingPolesDAC Featherlite NSL pole system with press fit connectorsBreathabilityFabric breathability (MVTR): 40000 g/m2/24 hoursSeamsAll seams taped with waterproof, solvent-free polyurethane tape (No PVC or VOC’s)Stakes6″ Dirt Dagger™ UL Stakes included: 8 – may be buried as “dead-man” anchorsGear LoftsFits Square, Large Wall – sold separatelyPFASAll materials include no intentionally added PFASStorageGuidelinesAlways make sure your tent is dry and free of debris before storing. Fold and roll your tent a different way each time to avoid permanent creases. Store in a cool, dry place. Never leave your tent in hot temperatures (such as a car trunk or attic space) for long periods of time, as it will damage the material coatings. Storing your tent damp can result in mildew growth, which may cause your tent to smell, leak, or delaminate. Mildew damage is not covered under warranty.CleaningLight CleaningFor light cleaning, sponge the product with warm water (not hot).Supplies NeededWash basin (or bath tub), Warm water (not hot), Waterproof Gear Cleaner (we recommend products like Nikwax Tech Wash), SpongeStep 1Submerge your gear in warm, clean water. Gently agitate with hands. Empty dirty water. Repeat until most of the excess dirt/grime is removed and water is mostly clear.Step 2Apply waterproof gear specific wash and gently work into fabric with sponge.Step 3Rinse gear thoroughly.Step 4Hang it up to dry.Step 5Triple check that your gear is completely dry before storage or use.Important NotesWarningsDo not dry clean or machine-wash. Detergents and dry cleaning solvents will damage the fabric and ruin waterproofing. Never use hot water, bleach, liquid detergents, or dishwashing liquids. Allow to dry COMPLETELY before storage or use. Avoid prolonged direct sunlight as UV exposure can compromise waterproofing.Seam SealingFactory SealedBig Agnes tents are seam sealed as part of our manufacturing process! This seam tape alone is durable enough to prevent water leakage. Any seams that have been taped do not need to be seam sealed with a liquid sealer unless you want extra protection. Make sure the seam-sealer is completely dry before re-packing your tent. Damage caused by misapplication may void warranty.ZippersMaintenanceKeeping your zippers clean will help keep the coils and sliders from wearing out. If filled with dirt, vacuum or brush zippers before storing tent. We recommend Gear Aid Zipper Cleaner and Lubricant.Repairs and WarrantyCoverageAll Big Agnes tents are guaranteed against manufacturing or material defect. We do not warranty products damaged from normal wear and tear, alteration made by owner, misuse, accidents or damages caused by uses other than intended. Damage due to misuse, normal wear and tear, or improper care may be repaired, at the discretion of Big Agnes, at a reasonable charge. Tents returned for repair must be clean and free of debris.






Reviews
There are no reviews yet.