BBS01 / BBS02 E-Bike Lighting Kit – Headlight, Tail Light, Turn Signals – 24V / 36V / 48V

Description

This is a complete lighting and signal kit designed for Bafang BBS01 and BBS02 mid-drive e-bike conversion systems. It combines a front headlight with horn, rear brake light, and turn signals into a single wired system intended to run directly from the bike’s electrical supply.

This kit is best suited for converted e-bikes that need basic road visibility and signaling without adding separate battery-powered lights. Compared to standalone bike lights, this setup integrates directly into the e-bike system and supports brake and signal functions rather than just illumination.

Key Features

• Integrated e-bike lighting system for BBS01 / BBS02 conversions

• Aluminum alloy front headlight (Model L-030)

• Headlight functions: low beam + horn

• Front light output: 650 lumens

• Horn volume: approximately 75–100 dB

• Rear light (Model WD-10C) with brake light function

• Turn signal system with flowing light effect

• Designed for direct electrical connection (wired system)

Electrical Specifications
Front Headlight (L-030):

• Voltage support: 24V / 36V / 48V

• Power: 9W

• Current draw:

  • 48V: 190mA

  • 36V: 250mA

• Wire type: three-core

• Dimensions: approx. 50 × 62 × 73 mm

• Cable length: approx. 15 cm

Rear Light (WD-10C):

• Voltage support: 36V / 48V

• Power: 1.1W

• Brightness: 30 lumens

• Current draw:

  • 48V: 23mA

  • 36V: 17mA

• Wire type: four-core

• Functions: rear light, brake light

Turn Signals:

• Voltage support: 36V / 48V

• Power: 3W

• Light color: yellow and blue

• Style: flowing signal effect

Switch Unit

• Dimensions: 26 × 54 × 54 mm

• Weight: approx. 41g

• Material: PA6 + 20GF TPR

• Wiring: 6-pin / 8-pin

• Current: 0.5A at 12V DC

• Operating temperature: −20°C to 60°C

Compatibility & Use Notes

• Designed for Bafang BBS01 and BBS02 mid-drive systems

• Supports 24V, 36V, and 48V systems (headlight); rear and signals support 36V / 48V

• Intended for wired e-bike electrical systems, not battery-powered standalone use

• Plastic housings for rear and signal components

• Professional installation recommended for proper wiring and function

Service / Ownership Context
This is a conversion-style lighting kit, not a plug-and-play bicycle light. Proper voltage matching, wiring routing, and secure mounting are critical for reliability. Riders should confirm connector compatibility with their specific Bafang controller and display before installation. Periodic inspection of wiring and connectors is recommended, especially on bikes used in wet or high-vibration conditions.